Braun V3 creation2 User Manual download pdf (Page 5)

Our products are engineered to meet the highest

standards of quality, functionality and design.

We hope you thoroughly enjoy your new Braun

appliance.

Carefully read the use instructions before use.

Important

• Plug your hairdryer into an alternating current (

)

outlet only and be sure that your household

voltage corresponds to the voltage marked on

the hairdryer.

•

This appliance must never be used near

water (e.g. a filled wash basin, bathtub or

shower). Do not allow the appliance to

become wet.

• When using the hairdryer in a bathroom, always

unplug it after use. Even a switched-off hairdryer

presents a hazard if not unplugged.

• For additional protection, it is advisable to install

a residual current device (RCD) with a rated

residual operating current not exceeding 30 mA

in the electrical circuit of your bathroom. Ask

your installer for advice.

• Care should be taken not to block the inlet and

outlet grill when the hairdryer is switched on.

If either grill becomes blocked, the hairdryer will

automatically cut out. After cooling for a few

minutes, it will switch back on automatically.

• Do not wrap the mains cord around the

appliance. Regularly check the mains cord for

wear or damage, particularly where it enters the

product and the plug. If you have any doubt

about its condition take the appliance to your

nearest Braun Service Centre for checking/

repair. The mains cord of the appliance may only

be replaced by an authorised Braun Service

Centre. Unqualiﬁed repair work can lead to

extreme hazards for the user.

Description

Switch

Cold shot button

Protection ﬁlter

Concentrator nozzle

Adapter

Volume attachment

Brush attachment

Straightening comb attachment

Switch settings

Cold shot

To ﬁx a style with cold air, press the cold shot button.

Protection ﬁlter

Regularly wipe the ﬁlter clean. For a thorough

cleaning, remove the ﬁlter and clean it under

running water.

Concentrator nozzle

For precise styling use the concentrator nozzle.

Using the attachments

1 Attaching the adapter (a)

• Align the markings, attach the adapter

to the hairdryer and turn it clockwise until

it snaps into place.

• To remove the adapter, turn it anti-clockwise

and pull it off.

2 Connecting / changing the attachments (b)

• Choose an attachment (volume attachment,

brush attachment or straightening comb

attachment).

• Slide the attachment onto the adapter upwards

or downwards along the guiding grooves.

• To remove it, pull off the attachment upwards or

downwards.

3 Use

• For long-lasting styling results we recommend

that you apply a styling product (e.g. mousse)

and use the hairdryer on a low switch setting.

3.1 V

olume attachment

• Using the volume attachment

, you can add

volume and root lift to your hair.

• Place the volume attachment with the ﬁngers

against your head.

• Gently move the attachment back and forth

over a small section until the hair moves up the

ﬁngers. Hold the attachment in place until the

hair gets dry. Continue section by section.

3.2 Brush attachment

• The brush attachment

is ideal for untangling,

slightly shaping and brushing your hair while

drying, thus leaving your hair smoother and

shinier.

3.3 Strai

ghtening comb attachment

• The straightening comb attachment

is ideal

for untangling, combing and straightening

mid-length to long hair.

Subject to change without notice.

This product conforms to the European

Directives EMC 89/336/EEC and Low

Voltage 73/23/EEC.

Please do not dispose of the product in the

household waste at the end of its useful life.

Disposal can take place at Braun Service

Centre or at appropriate collection points provided

in your country.

0off

1 gentle drying 1-2

2 fast drying 3

1 styling 3

English

3541170_1800V3_MN Seite 5 Freitag, 26. Mai 2006 12:45 12

1 2 3 4 5 6 7 8 9 10 ... 34 35

Comments to this Manuals

No comments

Braun V3 creation2 User Manual Page 5

Comments to this Manuals

Related products and manuals for Hairdryers Braun V3 creation2