Braun BP3510 User Manual download pdf (Page 8)

5. The positioning system (A) shown on the left and

a beep confirm that you have reached the right

measuring position. The measurement will start

automatically. When the measurement is complete, a

beep will sound again, and the reading is displayed:

Upper (systolic) value

Lower (diastolic) value

Pulse

Please note:

• In case of system errors or handling mistakes, the

display will show an error code, instead of giving

you inaccurate results (for details, please see

section «What to do if…»).

• 15 seconds after switching on the appliance, the

measuring process will start automatically, even if the

appropriate measuring position has not been reached.

Turning off

Press the on/off button to turn the product off. Otherwise

the product will turn off automatically after 2 minutes.

Memory mode

Your blood pressure monitor can store the readings of

50 measurements. Storing is done automatically after each

completed measurement. The memory is non-volatile. This

means that you will not loose stored data when changing

batteries. The memory cannot be cleared. Once the

memory is full, the oldest values will be overwritten.

Recalling stored readings

To recall stored readings, first turn the product off,

then press the memory button (D). A single push (m

will recall the latest reading. The lower display line

successively shows memory index and pulse on the one

hand and date and time of the respective measurement

on the other hand.

Repeatedly pressing the memory button (D) will call up

one by one all stored readings:

m (–) towards older readings

n (+) towards younger readings

6083402_BP3510_S4-54 Seite 8 Dienstag, 16. Januar 2007 1:18 13

1 2 3 4 5 6 7 8 9 ... 53

No comments

Braun BP3510 User Manual Page 8