Braun Xpressive 7381 WD User Manual download pdf (Page 7)

8

The best environmental temperature for

charging is between 5 °C and 35 °C.

As a safety feature to avoid overheating, it

may happen that the charging lights flash

(red/green). After cooling down, the

appliance will continue charging with the

green charging light flashing.

Getting prepared for …

… dry usage

Your skin must be dry and free from grease

or cream.

Optional skin cooling: For the first few

epilations or if you have sensitive skin, you

can use the cooling application, recom-

mended by dermatologists to help reduce

possible skin irritation.

Ensure that the gel pack has been in the

deep freezer (***) for at least 2 hours (for

convenience you can store the gel packs in

the freezer).

Insert the gel pack underneath the glove‘s

transparent foil. Use only with glove.

Put transparent (cool) side of the glove on

your leg.

Start cooling for approx. 1/2 minute, longer

if needed.

Epilate the cooled skin area immediately.

Repeat cooling and epilating until

completion.

While epilating, please ensure your skin is

dry.

Important: Apply cooling glove to the same

area for no longer than 2 minutes. Keep away

from sunlight. Do not use gel pack when

damaged. Dispose of in household waste. Do

not use if you are hypersensitive, allergic to

the cold, or if your skin suffers from sensory

disturbances, when suffering from cardiac

diseases or arterial circulatory disorders.

•

•

•

•

•

•

•

•

•

… wet usage

The appliance can be used on wet skin, even

under running water. Make sure that the skin

is really moist in order to achieve optimum

gliding conditions for the appliance.

Additionally, you may apply some shower gel

to the moist skin for results that will leave

your skin beautifully soft and smooth after

wet epilation.

Before use, always make sure that the

epilation head is clean.

Always make sure that the epilation head

(2) is provided with a cap.

To change caps, press their lateral ribs and

pull off.

To change heads, press the release button

(6).

How to epilate

1 Turning on

Press one of the lock keys and turn the

switch clockwise to setting 2 (optimum

setting). For reduced speed, choose

setting 1 (soft setting).

The «smartlight» comes on instantly

and shines as long as the appliance is

switched on. It reproduces an almost

daylight condition, thus revealing even

the finest hair and giving you a better

control for improved epilation efficiency.

2 How to guide the appliance

Always stretch your skin when epilating.

Always make sure that the epilation area

between the massaging rollers is in

contact with your skin.

The pivoting caps automatically adapt to

the contour of your skin.

Guide the appliance in a slow, continu-

ous movement without pressure against

•

•

•

•

•

•

•

•

•

•

98650766_SE_7381_IBERIA.indd 898650766_SE_7381_IBERIA.indd 8 15.08.2008 10:44:47 Uhr15.08.2008 10:44:47 Uhr

1 2 3 4 5 6 7 8 ... 30

Comments to this Manuals

No comments