Braun PV 2202 User Manual download pdf (Page 4)

Decalcifying / Self-cleaning

Braun ProGlide-jet irons have a built-in system

(anti-calc. valve) to prevent calcification. It allows

you to clean residues from the steam chamber.

Do not use commercial decalcifiers; they may

damage the sole plate. We recommend to use

the self-cleaning function every 3 months.

1. Turn the steam regulator

to the position «

•

(= steam off).

2. Fill the water tank to the marking «max.»

and turn the temperature selector

to the

●●●

marking («self-cleaning» = SC) (A).

3. Plug the iron into the socket and wait till the

pilot light

goes off.

4. Unplug the iron and hold it over a sink.

5. Turn the steam regu-

lator

clockwise to

the end of the red

marking (B) and then

6. keep turning it to the

double-arrow marking

. The steam regu-

lator will lift (C).

7. Pull out the steam

regulator together with

the valve vertically (D).

Do not touch the lower

end of the anci-calc.

valve with your fingers,

to avoid a possible

greasy film.

8. Allow all water to drain through the steam

vents in the sole plate, while shaking the iron

slightly.

(Caution: Hot water and steam come out from

the sole plate.)

9. Wait for the sole plate to cool down and then

clean it (see «Maintenance and Cleaning»).

10. Make sure that the sole plate is completely dry

before storing it.

Cleaning the anti-calc. valve on the steam

regulator

During the time the sole plate is cooling down we

recommend to decalcify the anti-calc. valve in

the following way:

1. Put a small quantity of white vinegar (not

vinegar essence) or lemon juice into a glass or

bowl.

2. Immerse just the bot-

tom part of the valve in

the liquid, wait till it is

decalcified and care-

fully brush of remain-

ing residue (E) .

Do not use a metal

brush.

3. Then, rinse it under

running water without touching the lower end

of the valve.

Re-inserting the steam regulator with anti-calc.

valve

1. Re-insert the steam regulator so that the

double-arrow aligns with the marking on

the iron (F).

2. Then push it down carefully and at the same

time turn the button anti-clockwise.

3. Keep turning the button

to the marking «

•

(= steam off).

4. If your iron has the shot

of steam, refill the tank

with water, heat the

iron up and press the

button

3 to 4 times in

the shot of steam

function before ironing, to rinse the iron.

ATTENTION: The iron must not be used without

the steam regulator and the anti-calc. valve.

Ironing Guide

To begin ironing, it is best to start with fabrics

requiring a lower temperature (e. g. synthetics),

and continue with those requiring a higher

temperature (e. g. cotton, linen).

Silk and silk-like synthetics tend to waterspot,

therefore before using the water spray feature,

test it on an inconspicuous spot first.

Mixed fabrics: Always select the temperature

suited for the most sensitive fibre the garment

contains. Follow manufacturer’s instructions on

the label.

Subject to chance without notice.

This product conforms to the

EMC-Requirements as laid down by

the Council Directive 89/336/EEC.

Guarantee

We grant a 1 year guarantee on the product

commencing on the date of purchase.

Within the guarantee period we will eliminate,

free of charge, any defects in the appliance

resulting from faults in material or workmanship

either by repairing, or exchanging parts or

exchanging the whole appliance as we may

choose.

Not covered by this guarantee: damage arising

from improper use or storage (operation with

incorrect current/voltage, plugging it into an

unsuitabie power point, breakage use of

commercial decalcifyers, wet storage on the

ironing surface), normal wear and defects which

have a negligible effect on the value or operation

of the appliance.

The guarantee becomes void if repairs are

undertaken by unauthorised persons and if

original Braun parts are not used.

The guarantee only comes into force if the date

of purchase is confirmed by the dealer's stamp

and signature on the guarantee card and

registration card.

This guarantee extends to every country where

this appliance is supplied by Braun or its

appointed distributor and where no import

restrictions or other legal regulations hinder or

prevent service being given under guarantee.

Service under the guarantee does not affect the

expiry date of the guarantee. The guarantee on

parts or entire appliances which are exchanged

ends when the guarantee on this appliance

expires.

In the event of a claim under this guarantee,

hand in the complete appliance with the valid

guarantee card to your dealer, or send both to

the nearest Braun Customer Service Centre.

All other claims including for damages resulting

from this guarantee are excluded unless our

liability is legally mandatory.

Those claims arising out of the sales contract

with the vendor are not affected by this

guarantee.

For UK only:

This guarantee in no way affects your rights

under statutory law.

Fabrics Temperature

regulator

setting

Steam

regulator

setting

Synhetics

(acrylic, acetate)

●

•

(= steam off)

Silk, rayon,

nylon, polyester,

cotton blends

●●

•

(= steam off)

to max.

Wool

●●

•

(= steam off)

to max.

Cotton

●●●

•

(= steam off)

to max.

Linen

●●●

to max.

•

(= steam off)

to max.

1 2 3 4 5

ProGlide-jet 1

Comments to this Manuals

No comments

Braun PV 2202 User Manual Page 4

Comments to this Manuals

Related products and manuals for Irons Braun PV 2202