Braun L955 User Manual download pdf (Page 17)

Page 15

Pre-Lift Operation Notes and Details

Bridge Plate: The hinged bridge

plate assembly bridges the gap

between the lift platform and the

vehicle floor when the platform is

positioned at floor level. The

bridge plate assembly consists of

the bridge plate and the bridge

plate extension.

Typically, the bridge plate

extension is bolted to the

bridge plate as shown in the Lift

Terminology Illustration (stan-

dard bridge plate configura-

tion). In stepwell applications

where additional platform

length is required, the exten-

sion plate may be bolted to the

heel (inboard end) of the

platform.

When the OUT (Unfold) switch

is pressed and the platform

unfolds from stow position to

floor level, the bridge plate is

automatically deployed to the

bridging (horizontal) position.

When the IN (Fold) switch is

pressed and the platform folds

from deployed (horizontal)

position to stowed position, the

bridge plate folds (rotates) to the

vertical position.

The outboard edge of the bridge

plate extension rests on the lift

platform (standard bridge plate

configuration). When the

extension plate is bolted to the

heel of the platform, the bridge

plate rests on the extension

plate.

Automatic Floor Level Switch-

ing: When the platform unfolds

from the stowed position, the

platform stops automatically at

floor level when fully unfolded.

When raising the platform from

ground level, the platform auto-

matically stops at floor level when

raised fully.

Fully-Unfolded (horizontal)

Bridge Plate (bridging position)

Lift Features

1 ... 16 17 18 ... 43

Comments to this Manuals

No comments