Braun L955 User Manual download pdf (Page 21)

Page 19

Pre-Lift Operation Notes and Details

operator must activate the

DOWN switch to lower the

platform fully to the ground. The

lift operator or attendant must

view the platform as it lowers to

be certain the entire platform

reaches and rests safely on the

ground. Stop activating the

DOWN switch if any portion of

the platform is obstructed while

descending or the platform does

not reach ground level for any

reason (contact with an obstruc-

tion, mechanical failure, exceed-

ing the lift “floor-to-ground”

capacity, etc.).

After the platform is fully lowered

(platform reaches the ground),

the lift operator should continue

to press the DOWN switch to

unfold the outboard roll stop and

the side entry roll stop fully

(ramp position). Note: The roll

stops must be fully unfolded

until the entire wheelchair has

crossed the roll stops when

loading or unloading at ground

level. Discontinue lift opera-

tion immediately if the roll

stops or latch do not operate

properly.

Bridging: The L955SE incorpo-

rates a bridging feature. This

feature stops the down travel of

the platform if the outboard end

of the platform contacts a raised

surface (such as a curb), pre-

venting the operator from lower-

ing the inboard end of the

platform.

Handrails: Dual handrails are

provided for wheelchair passen-

ger (or standee) use. The

handrails automatically unfold to

the deployed position when the

platform unfolds and fold auto-

matically to the stowed position

when the platform folds. The

passenger may choose to grip

the handrails when on the lift

platform (if applicable).

Note: The right (front) handrail

is equipped with an UP/DOWN

control switch (details in Control

Switches section). Discontinue

lift operation immediately if

the handrails do not operate

properly.

1 ... 20 21 22 ... 43

Comments to this Manuals

No comments