6
Whisks
N
/
O
For mixing cake mixtures, sponges and
mashed potatoes.
For whipping cream (minimum 100 ml
cream), eggwhites (minimum 1 eggwhite),
and creamy ingredients.
Generally all speed settings may be used.
The speed settings are recommended as
follows:
Switch
position 1:
• For carefully adding whipped eggwhites
or other foamy ingredients.
• Adding flour to foamy substances,
without flattening them (e. g. sponges).
• Smoothly adding flour, cacao etc.
without blowing them around.
• Mashing of boiled potatoes for mashed
potatoes.
Switch
position 2:
• Initial and final speed when whipping
larger quantities of cream.
• Whipping of smaller quantities of cream.
• Adding of liquids to processed goods
(little splashing of the liquids, e. g.
mashed potatoes).
Switch
position 3:
• Whipping of cream, eggwhites, sponges
and other foamy goods, e. g. desserts.
• Mixing of creamy goods and mixtures.
Tips:
– To obtain optimum results when making
cake mixtures, etc. all ingredients
should have the same temperature.
Butter, eggs, etc. should be removed
from the refrigerator some time before
they are being used.
– Whipped cream has more volume, if the
cream is well chilled before being
whipped.
– Mashed potatoes will become more
creamy, if all ingredients are being used
as hot as possible (e. g. potatoes
immediately after boiling).
Handblender attachment
(With the models M 820, M 830,
M 870, M 880 and M 880 M)
To insert the handblender attachment
P
into the motor part, slide back the cover
of the opening for the handblender
attachment
%
(d) and insert the hand-
blender attachment into the opening
so
that the marking on the handblender
attachment aligns with the marking on the
motor part (e). Then turn the handblender
90° clockwise (e), until it locks. To remove
the handblender attachment, turn it 90°
anti-clockwise and pull it off.
Im
portant: The handblender attachment
may only be immersed to the mark (f).
The handblender attachment blends and
mixes fast and easily. Use it to make
sauces, soups, mayonnaise, dietary and
baby food.
Im
portant: The handblender attachment
can be operated only in the «pulse» mode
(switch position «P» – see section «Switch
»). When the handblender attachment is
inserted into the motor part, the switch
positions 1, 2 and 3 do not function for
safety reasons.
The handblender attachment can be used
in the practical mixing/measuring beaker,
but you can operate the Braun hand-
blender attachment just as well in any
bowl, pan or other container too.
Should you want to blend directly in the
saucepan while cooking, take the pan from
the stove first and allow to cool to protect
your handblender attachment from
overheating. Never use your handblender
attachment in very hot or boiling in-
gredients. To avoid splashing, insert the
handblender attachment into the vessel
first, and then switch the appliance on.
Keep the switch pressed down as long as
you operate your handblender attachment.
Turn appliance off first by releasing the
switch when you are finished.
Im
portant: The mixing/measuring beaker
may be used onl
y with the handblender
attachment for processing smaller
quantities. It should not
be used with a
whisk. Do not place the mixing/measuring
beaker into a microwave oven.
Chopper attachment
(With the models M 870, M 880 and
M 880 M only)
Maximum capacity: 250 g of meat
Assembling and operating
• Pull off the plastic blade cover from the
blade insert.
Caution: Blades are shar
p!
Always hold by the upper plastic part.
• Place the double function base/lid on
the bottom of the chopper bowl.
• Place the blade insert on the centre pin
of the chopper bowl (h).
• Place the food into the chopper bowl.
• Set the upper part on the chopper
bowl (i).
• Safety look: The chopper will not work
if the upper part is not fitted properly.
• Connect the chopper attachment with
the motor part by inserting the two pins
on the upper part into the two corre-
sponding openings on the bottom of the
motor part, until the upper part locks into
place (j).
• Use the «pulse» mode (switch position
«P») for brief and fast processing
whereas the switch position «3» should
be used for fine grating.
Always hold the motor part with your
hand and do not allow the appliance to
operate unsupervised.
Food preparation and chopping
•Donot
chop ice cubes or extremely hard
food, such as nutmeg, chocolate and
coffee beans.
• When chopping meat, ensure that all
bones, tendons and gristles are
removed.
• Besides meat, the chopper attachment
can also be used, e. g. for cheese,
onions, parsley, dried fruits, tomatoes,
carrots, apples etc.
• When chopping cooked food, allow it to
cool off for a few minutes before putting
it into the chopper bowl.
• The double function base/lid also serves
as air-tight cover for the chopper bowl.
7
Comments to this Manuals