Braun 6 User Manual download pdf (Page 20)

Page 18

Pre-Lift Operation Notes and Details

Lift Features (continued)

(bridging) position when it

reaches vehicle floor level. The

roll stop must overlap the lift base

plate a minimum 1/2".

When the FOLD switch is

pressed and the platform folds

from floor level to the stow

(vertical) position, the roll stop/

bridge plate automatically travels

inboard to the stowed position.

Read warning posted on

opposite page. Discontinue lift

operation immediately if the

roll stop does not operate

properly.

Automatic Inboard Roll

Stop and Bridge Plate “IB”

Fully Folded

(vertical)

Inboard

Roll Stop

The inboard roll stop “IB”

must overlap the base

plate a minimum 1/2".

Fully Unfolded

(horizontal)

Inboard Roll Stop

(bridging position)

Fixed Inboard Roll Stop: A

stationary inboard roll stop is built

into “non-IB” L915 lift platforms

(shown in left-hand photo on

page 19).

Independent Hinged Bridge

Plate: “Non-IB” L915 lift models

are equipped with an independent

hinged bridge plate (shown in

1 ... 19 20 21 ... 45

Comments to this Manuals

No comments