Braun 6 User Manual download pdf (Page 5)

Page 3

Lift Terminology

The “quick-disconnect” hand-held

control switchbox is connected to

the pump module. “Quick-

disconnect” hand-held controls

are available with three types of

cable (standard, armored and

coiled).

The control box is equipped with

two color-coded rocker switches,

(UNFOLD/FOLD and DOWN/UP).

The switches activate the auto-

matic lift functions. Details

regarding the control switches

and their functions are provided in

the Pre-Lift Operation section

(page 14).

Lift Frame: The lift frame

consists of the base plate, two

towers, the parallel arms, the

vertical arms, platform pivot arms

and the handrails. The two main

hydraulic cylinders are housed in

the parallel arms. The electrical/

hydraulic powered lift frame

components mechanically unfold,

lower, raise and fold the lift

platform assembly.

Platform Assembly: The lift

platform assembly consists of the

steel tubing frame with grating

surface upon which the wheel-

chair is positioned, the outboard

roll stop, roll stop latch, the

inboard roll stop (fixed inboard roll

stop models only), and the

hydraulic cylinder assembly that

powers the outboard roll stop.

Lift-Tite

™

Latches: The spring

loaded latches prevent the

platform from unfolding from the

stowed position in the event of

platform drift. Further details

Direction: The terms "left (rear),"

"right (front)," "inboard," and

"outboard" will be used through-

out this manual to indicate

direction (as viewed from outside

the vehicle looking directly at the

lift). Refer to the Lift Terminology

Illustrations for clarification of

direction terms.

Lift Components

Refer to the Lift Terminology

Illustrations on pages 6 and 7.

Pump Module: The lift-mounted

pump module consists of the

hydraulic pump, the manual hand

pump and electrical components

that power the lift electric/hydrau-

lic systems.

Hand-Held Switch Control Box:

1 2 3 4 5 6 ... 45

Comments to this Manuals

No comments