Braun 6 User Manual download pdf (Page 25)

Page 23

Pre-Lift Operation Notes and Details

Standees: Lift Operating Instruc-

tions apply to wheelchair passen-

gers and standees. Standees

should stand in the center of the

platform (fully inside the yellow

boundaries) and grip both

handrails (if able) when on plat-

form.

Yellow Boundaries: The passen-

ger must be positioned in the

center of the platform to prevent

side-to-side load imbalance. The

lift attendant (operator) should not

ride on the platform with the

passenger.

Yellow platform loading bound-

aries are identified in the following

manner. Yellow plastic edge liner

(u-molding) is positioned on

platform side plates of all lift

boundaries) and the wheelchair

brakes are locked when a passen-

ger is on the lift platform. The lift

passenger must keep hands,

arms and all other body parts

within the lift occupant area and

clear of all moving parts.

Vehicle (Floor Level) Loading

and Unloading: The platform

must be fully raised (at floor level)

and the bridge plate must be

properly positioned when loading

or unloading passengers in or out

of the vehicle. It is the responsi-

bility of the lift operator (atten-

dant) to ensure the platform

and the bridge plate are prop-

erly positioned at floor level

when loading and unloading

passengers.

models. Yellow edge liner is

positioned on fixed inboard roll

stops also. Yellow plastic caps are

placed on the dual handrails.

A yellow boundary strip decal is

affixed to extruded aluminum

outboard roll stops. Yellow anti-

skid is affixed to nonextruded steel

outboard roll stops. A yellow

boundary strip decal is affixed to

the inboard end (heel) of the

platform (automatic inboard roll stop

“IB” lift models). Yellow antiskid is

affixed to the outboard edge of

independent hinged bridge plates

(“non-IB” lift models).

The attendant must always be

certain the wheelchair passenger or

standee is properly positioned on

the platform (fully inside yellow

1 ... 24 25 26 ... 45

Comments to this Manuals

No comments