Page 35
MANUAL
OPERATION
Using hand pump handle:
TO UNFOLD PLATFORM (OUT):
1. Close hand pump valve (turn clockwise).
2. Insert handle in pump and stroke until
platform folds fully (stops).
3. Open hand pump valve (turn
counterclockwise) until platform reaches
floor level. Open 1/2 turn only.
4. Close hand pump valve (turn clockwise).
DOWN (TO LOWER):
Open hand pump valve (turn
counterclockwise). Open 1/2 turn only.
UP (TO RAISE):
1. Close hand pump valve (turn clockwise).
2. Insert handle in pump and stroke until
platform reaches floor level.
TO FOLD PLATFORM (IN):
Insert handle in pump and stroke.
Close valve before operating electric pump.
27146
O
P
E
N
C
L
O
S
E
OPEN
CLOSE
Replace missing, worn
or illegible decals.
Failure to do so may
result in serious bodily
injury and/or property
damage.
W
A
RNING
Decals and Antiskid
Decals
The lift is only as safe as the opera-
tor. Replace any missing, worn or
illegible decals! Part numbers are
provided for decals. Inspect your lift for
missing, worn or illegible decals. Call
1-800-THE LIFT for replacements.
W
A
RNING
Contact The Braun
Corporation before
adjusting hydraulic
pressure relief
valve. Failure to
do so may result
in serious bodily
injury and/or
property damage.
22249
27146
OPERATING
INSTRUCTIONS
19342
Read warnings and operate lift as
outlined on LIFT OPERATING
INSTRUCTIONS decal. Lift operating
instructions apply to wheelchair
passengers and standees.
Standees must
stand at center of platform (fully inside
yellow boundaries), grip handrails and
lower head to clear door jamb header.
Lift Interlocks
vary in type and operation. Interlock
(if equipped) must be operated as
instructed by transit authority.
Standee Instructions:
Interlock Instructions:
19342
22249
27024
Note: Clean surfaces
with isopropyl alcohol
before decal or antiskid
application. Use a clean
cloth or paper towels.
Do not use oily shop
rags. Wipe surface free
of residue with dry
portion of cleaning cloth.
See Decals on page 36 also.
W
A
RNING
Read manual before
operating lift. Call
1-800-THE LIFT to
receive operator's
manual. Failure to
do so may result in
serious bodily injury
and/or property
damage. Keep
manual in lift pouch.
25674
O
p
er
u
a
l
Man
ator's
25674
W
A
RNING
Lift installation and servicing prohibited by
anyone who has not been certified by The Braun
Corporation Sales and Service School. Certified
service technicians should call 1-800-THE LIFT
to receive applicable installation/service manual.
Failure to follow this policy may result in serious
bodily injury and/or property damage.
25675
25675
U.S. Patent No. 6,065,924
Patents Pending
W
A
RNING
LIFT OPERATING
INSTRUCTIONS
• Read manual before operating lift.
• Load and unload on level surface
only.
• Engage vehicle parking brake before
operating lift.
• Provide adequate clearance outside
of vehicle to accommodate lift.
• Do not operate lift if you suspect lift
damage, wear or any abnormal
condition.
• Keep operator and bystanders clear
of area in which lift operates.
Whenever a wheelchair passenger
is on the platform, the:
• Passenger must be positioned
fully inside yellow boundaries
• Wheelchair brakes must be locked
• Roll stop(s) must be up
Failure to follow these rules may result
in serious bodily injury and/or property
damage.
OPEN DOOR(S) AND SECURE
TO UNFOLD PLATFORM:
Stand clear and press UNFOLD
switch until platform stops (reaches
floor level).
Note: In event platform does not
unfold, press FOLD switch to
release Lift-Tite™ latches.
TO UNLOAD PASSENGER:
1. Load passenger onto platform and
lock wheelchair brakes.
2. Press DOWN switch until entire
platform reaches ground level and
roll stop unfolds fully.
3. Unlock wheelchair brakes and unload
passenger from platform.
TO LOAD PASSENGER:
1. Load passenger onto platform and
lock wheelchair brakes.
2. Press UP switch to fold roll stop
up and raise platform to floor level.
3. Unlock wheelchair brakes and unload
passenger from platform.
TO FOLD PLATFORM:
Press FOLD switch until platform
stops. Release switch.
CLOSE DOOR(S)
27204
U.S. Patent No. 5,261,779
U.S. Patent No. 5,806,632
W
A
RNING
Adjust switch as specified
in installation/service
manual.
HYDRAULIC
PRESSURE SWITCH
ADJUSTMENT
Improper hydraulic
pressure switch
adjustment may result
in serious bodily injury
and/or property damage.
27154
27154
Comments to this Manuals