(A) Filling the water tank
• Make sure that the appliance is switched off and
the system is unplugged.
• Remove the water tank (6).
• Fill the water tank with tap water, taking care not to
exceed the “max” level but at least up to the mark
“min” otherwise the appliance will not be ready to
start steam ironing. If you have extremely hard
water, we recommend that you use a mixture of
50 % tap water and 50 % distilled water.
• Never use distilled water exclusively. Do not add
any additives (e.g. starch). Do not use
condensation water from a tumble dryer.
• Insert the water tank.
• Place the appliance on a stable, level surface.
Note:
If you use filtering devices, make absolutely sure the
water obtained is neutral ph.
Water reserve function
• When the water level is becoming low, the icon
starts flashing. At this stage it is possible to
continue steam ironing for about 10-15 minutes.
• When the icon
turns permanently on, it
becomes necessary to refill the tank. At the same
time, the temperature control LED (12) is flashing
and the icon related to the selected setting turns off.
• To continue steam ironing, refill the water tank (A).
(B) Start ironing
• Place the iron on the iron rest (5) or on its heel
rest (15), plug in the appliance and press the On/
Off button (2).
• Select the setting (3) most suitable for the
garments to be ironed.
• The iron will start to heat up and the temperature
control LED (12) on the iron will flash.
• The related icon for the setting in the display (1)
will start to flash. When steam is ready the icon
turns permanently on.
• Once the temperature setting is reached, the
temperature control LED (12) is permanently on.
• Settings: The requested setting can be chosen
by pressing the corresponding button (eco,
normal or turbo). To switch from one setting to
another press the dedicated button (3).
CareStyle 7
eco
It is suggested for most delicate garments like
synthetics, silk and blended fabrics for which you
need less steam. This setting allows less power
consumption.
normal
It is suggested for garments like wool, polyester and
cotton/linen.
Note:The normal setting
i
s automatically
chosen when the appliance is switched on for the
first time, from 2
nd
switch on, it will be set to the last
setting chosen.
CareStyle 7 Pro
eco
It is suggested for most delicate garments like
synthetics, silk and blended fabrics. This setting
allows less power consumption
normal
It is suggested for garments like wool, polyester and
cotton.
turbo
It is suggested for garments that need more
powerful steam, like thick cotton/linen and jeans.
Note: Due to higher temperature in the turbo mode,
do not leave unattended the iron on garments to
avoid any damage.
Note: When the appliance is switched on, it will
always be set to the normal steam mode,
independently on the last setting chosen.
• For steam ironing press the steam button (11)
below the iron handle. Steam will come out from
all the holes in the soleplate.
• Double trigger: Press the steam button (11) or
the precision shot button (13) twice in quick
succession within 1 second. There will be a
continuous steam emission for a few seconds.
Press the steam button (11) or the precision shot
button (13) once again to stop the function.
• For dry ironing iron without pressing the steam
button (11). Please note that after 10 minutes of
dry ironing, the iron switches to the auto-off
mode.
• Vertical steam: The iron can also be used for
steaming hanging clothes (B).
• 3D soleplate: The unique round shape of the 3D
soleplate ensures best gliding results on difficult
parts (e. g. buttons, pockets etc.)
(C) Precision shot
• Press the precision shot button (13) completely down.
• Steam will come out of the tip area of the
soleplate only.
• To stop this function release the button (13).
• If you do not press it down completely, some
steam may also come out from the rear steam
holes in the soleplate.
10
DLB245628_5712811801_Use_Instruction_IS_7043_7044_7055_7056_INT.indb 10 31.03.16 11:23
Comments to this Manuals