Braun CareStyle 7 Pro User Manual download pdf (Page 12)

(D) Iron Auto-Off

• When the iron is in the auto-off mode, the icon

is flashing and the temperature control LED (12) is

off. The iron will turn off to reduce power

consumption.

• It is activated if after 10 minutes there has been

no steam emission.

• To turn the iron on again, the On/Off button (2)

has to be pressed. Before starting ironing again

wait until the temperature control LED (12) is

continuously on.

After ironing

• Press the On/Off button (2) to turn off the

appliance.

• Unplug and let the appliance cool down before

storing.

• Empty the water tank.

• Lock the iron.

(E) Lock system

The lock system can be used for a safe and easy

storage of the steam station and the iron. Do not lift

or carry the appliance on the handle of the locked

iron.

• Place the soleplate into the recess on the iron

mat.

• Press down the tip of the iron until you hear a

“click” and the iron will be locked automatically.

• To unlock the iron slide the locking system

forward. The iron will be released.

(F) Descaling

To maintain optimum performance, the system

needs to be decalcified after every 15 litres of water

consumption (about 8 complete refills).

The icon

is flashing.

• First, switch off and unplug the appliance.

• Unlock the iron and remove the iron from the iron

rest. Wait until the appliance has cooled down

(minimum 2.5 hours).

• Remove and empty the water tank.

• Remove the transparent cover (8) and unscrew

the cleaning valve (9).

• Empty the boiler.

• Pour in 500 ml tap water. Do not use any

chemicals, additives or descaler.

• Screw the cleaning valve (9) to close the boiler.

• Shake the base unit to rinse, then empty the

boiler.

• Repeat this procedure one more time.

• After having finished the descaling procedure,

plug in, switch on (2) and press the calc clean

system button (4) for 2 seconds to reset.

If the appliance is switched off without descaling,

the icon

will start to flash again when it is next

switched on.

Note: Because of the different water composition

by using an installed in-house permanent descaler,

it is recommended to descale the system after every

4 complete refills. Please note that in this case the

icon for descaling will not automatically start

flashing.

(G) Cleaning and maintenance

• Before cleaning, always make sure that the

appliance is switched off, unplugged and has

cooled down completely.

• Wipe the soleplate clean with a damp or dry cloth.

• Never use scouring pads, vinegar or other

chemicals.

• To clean the soft material on the handle use a

damp cloth.

DLB245628_5712811801_Use_Instruction_IS_7043_7044_7055_7056_INT.indb 11 31.03.16 11:23

1 ... 11 12 13 ... 119

Comments to this Manuals

No comments

Braun CareStyle 7 Pro User Manual Page 12

Comments to this Manuals