Braun turbo MR 6550 M FP-HC User Manual download pdf (Page 9)

Whipped cream:

Only whip up to 400 ml chilled cream

(min. 30 % fat content, 4 – 8 °C).

Start with a low speed setting «1» and while

whipping, increase the speed to setting «15».

Egg snow:

Only whip up to 4 egg whites.

Start with a medium speed setting «7» and while

beating, increase the speed to setting «15».

How to operate your food

preparation (FP) attachment 3

1 Pusher

2 Lid

2a Coupling for motor part

2b Filling tube

2c Lid interlock

3 Blade

4 Bowl

5 Anti-slip base (also serves as a lid)

6 Tool holder

6a Slicing tool

6b Shredding tool (coarse)

6c Shredding tool (ﬁ ne)

6d Julienne tool (rectangular)

6e Julienne tool (triangular)

Chopping

(see picture section I with processing table j

)

The blade (3) is perfectly suited for chopping

meat, cheese, onions, herbs, garlic, carrots,

walnuts, hazelnuts, almonds etc.

For chopping hard goods, use the turbo

switch „.

N.B.: Do not chop extremely hard food, such

as nutmeg, coffee beans and grains.

Before chopping ...

• pre-cut meat, cheese, onions, garlic,

carrots, chillies

• remove stalks from herbs, un-shell nuts

• remove bones, tendons and gristle from

meet.

a) Carefully remove the plastic cover from

the blade (3). Caution: the blade is very

sharp! Always hold it by the upper plastic

part. Place the blade on the centre pin of

the bowl (4) and give it a turn to lock into

place. Always place the bowl on the anti-

slip base (5).

b) Place the food in the chopper bowl.

c) Attach the lid (2) onto the bowl with the

interlock (2c) positioned next to the bowl

handle. To lock the lid, turn it clockwise so

that the interlock engages with a «click»

above the handle.

d) Insert the motor part ! into the coupling

(2a) until it locks. Make sure the pusher is

in place.

e) To operate, press switch ‚ or „ on the

motor part and take hold of the bowl with

your other hand.

f) After use, press buttons ‰ to remove the

motor part. Remove the pusher.

g) Pressing the lid interlock (2c), turn the lid

(2) counter-clockwise to unlatch it and lift it

up.

h/i) Carefully take out the blade by turning and

pulling it, before removing the processed

food.

Mixing light dough

Using the blade (3), you may also mix light

dough like a pancake batter or a cake mixture

based on up to 250 g ﬂ our.

For a pancake batter, for instance, ﬁ rst pour

liquids into the bowl, then add ﬂ our and ﬁ nally

eggs. Pressing the turbo switch „, mix the

batter until smooth.

Slicing / shredding

(see picture section II with processing table j

)

Using the slicing tool (6a), you can slice e.g.

cucumbers, onions, mushrooms, apples,

carrots, radishes, raw potatoes, courgettes,

cabbage.

Using the shredding tools (6b, 6c), you can

shred e.g. apples, carrots, raw potatoes,

beetroot, cabbage, cheese (soft to medium).

The Julienne tools (6d, 6e) cut food into strips.

a) Place a tool (6a – 6e) into the tool holder

(6) and snap into position. Place the tool

holder on the centre pin of the bowl and

give it a turn to lock into place.

b) Attach the lid (2) onto the bowl with the

interlock (2c) positioned next to the bowl

handle. To lock the lid, turn it clockwise so

that the interlock engages with a «click»

above the handle.

c) Insert the motor part into the coupling until

it locks. Select speed settings according to

recommendations in picture (j).

d) Fill the food to be processed into the ﬁ lling

tube. Never reach into the ﬁ lling tube when

the appliance is switched on. Always use

the pusher (1) to feed in food.

e) Press switch

‚ or „ on the motor part to

operate.

f) After use, press buttons ‰ to remove the

motor part.

Pressing the lid interlock (2c), turn the lid

counter-clockwise to unlatch it and lift it up.

h) Take out the tool holder before removing

the processed food. To remove the tool

(6a – 6e), push it up at the end that

protrudes at the bottom of the tool holder.

How to operate your chopper

attachment 4

1 Upper part

2 Blade

3 Chopper bowl

4 Anti-slip base/lid

The chopper is perfectly suited for chopping

meat, cheese, onions, herbs, garlic, chilis

(with water), carrots, walnuts, hazelnuts,

almonds, prunes etc.

When chopping hard goods (e.g. hard cheese)

use the turbo switch „.

N.B.: Do not chop extremely hard food, such

as ice cubes, nutmeg, coffee beans or grains.

Before chopping ...

– pre-cut meat, cheese, onions, garlic,

carrots, chillies,

– remove stems from herbs, shell nuts,

– remove bones, tendons and gristle from

meet.

For best results, please refer to the speed

settings recommended in the processing

table (j).

Chopping

a) Carefully remove the plastic cover from the

blade (2). Caution: The blade is very sharp!

Always hold it by the upper plastic part.

Place the blade on the centre pin of the

chopper bowl (3). Press down the blade

and turn 90° to lock it. Always place the

chopper bowl on the anti-slip base (4).

b) Place the food in the chopper bowl.

c) Put the upper part (1) on the chopper bowl.

d) Insert the motor part ! into the upper part

(1) until it locks into place.

e) Press switch ‚ or # to operate the

chopper. During processing, hold the

motor part with one hand and the chopper

bowl with the other. Do not use the

chopper for longer than 2 minutes.

f) After use, press buttons ‰ to remove the

motor part.

g) Then remove the upper part.

h) Carefully take out the blade.

i) Remove the processed food from the

chopper bowl. The anti-slip base also

serves as a lid for the chopper bowl.

98626499_MR6550_MFP_S6-36.indd 998626499_MR6550_MFP_S6-36.indd 9 07.05.2008 12:02:08 Uhr07.05.2008 12:02:08 Uhr

1 2 3 4 5 6 7 8 9 10 ... 33

Comments to this Manuals

No comments

Braun turbo MR 6550 M FP-HC User Manual Page 9

Comments to this Manuals

Related products and manuals for Blenders Braun turbo MR 6550 M FP-HC